1.Use FAG or SKF spindle bearings, 3-point supports.
2.All gears and slide ways are hardened and precision ground.
3.Universal gearbox for both imperial and metric threads.
4.Meehanite bed casting.
5.One-piece base.
6.Oil bath type cross slide.
7.Automatic lubricating system.
8.Maximum cutting depth can be 8mm on 50mm diameter and best roundness 0.003mm (200mm long).
9.Swing over bed : 430 (mm)
10.Center distance : 560, 760, 1000, 1500, 2000 (mm)
11.Bed width : 300 (mm)
12.Spindle bore : 58, 78 (mm)
13.Spindle speed : 20-2000 rpm (12 steps)
14.Main drive motor : 5HP (3.75KW) / 7.5HP (5.625KW)
|
|
发送询问函给厂商: