Electronic Components & Parts | Resistors:

Carbon film resistors are the earliest and a still popular type of resistor. They are made by filming and splitting carbon separated from organic comp...

cement resistors are made by winding resistance wires around non-alkaline ceramic core, which is added with a layer of heat and humidity resistant and...

A tubular ceramic resistor has two terminals, and is wound with copper wire or chromium alloy wire to provide the resistance and then coated with a hi...

Chip resistors are made by depositing high-quality metal thick-film conductor on high-purity aluminum oxide ceramic substrate, and then applying a lay...

鋁殼電阻器、系由彈簧合金電阻體與成形鋁殼之組合，經高溫陽極處理後，再以特殊不燃性耐水泥充填，待陰乾、再藉由高溫處理固定絕緣而成。由於整個電阻器都被耐熱水泥充填固定，不怕外來之機械力量與塵埃環境，不但功率大且堅固、耐震、散熱良好，電阻溫度係數小、呈直線變化，其變通性佳多重組合選擇、更方便使用者安裝。適...

Fusible resistors can be custom designs. It is specially spiraled to prove the fusible function with flame retardant coating. App;ications are widely ...

1. Stable long life 2. Low inductance 3. Can be produced according to customer’s request. 4. Compact type with safety design of non-flammability an...

Motor resistor can be installed in the carburetor of car or motorcycle as a heater, and also can be a pseudo-load fitting for car or motorcycle lights...

1. High power rating, small size and ultra precision. 2. Srandard winding & non-inductive winding types 3. High stability, strong construction. 4. ...

1. Thin film passivated NiCr resistor 2. Very tight tolerance from ±0.01%~1% 3. Extremely low TCR from ±5~±50ppm/℃ 4. Wide resistor range 1 ohm~3M ...