Advanced Search

All Category

三協達企業有限公司

Wishbone extraction tool

產品型號:W-145 原產地:台灣

立即詢問產品 加入詢問清單
詳細規格及用途描述

  • Material: Cr-Mo Stee l W/Steel tube Black Finish.
  • Size 1250mmL.
  • Design the sliding groove for adjust the position to be work easily.
  • To push down the wishbone and other suspension parts, e.g. during the disassembly of the drive shaft, during replacing the gaiter or exchange of the wheel bearing. After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabilizer tension, in order to pull the joint from the support.
  • Pretty often here problems arise:
    - the joint wedges again in the cone, after it was pressed down onlybriefly with a tire lever.
    - the ball joint or gaiter get damaged.
    - the mechanic injures himself or damages suspension partswhen the tire lever slips away.
  • With this lever tool the work can comfortably and surely be accomplished by one person.
  • Packing: Brown box / 2pcs/12/13/2.5’ .

    • 相關產品
    公司名稱: 三協達企業有限公司
    地址: 403 台中市西區華美街32巷5號2樓
    電話: 886-4-2372-6027
    傳真: 886-4-2376-2023
    E-Mail:
    網址: www.ssdgroups.com
    www.cens.com/ssdgroups

    發送詢問函給廠商