51.

Three Hole W. Grooved Pin
MATERIAL：ALUMINUM/ALUMINUM ALLOY/STEEL/STAINLESS STEEL/BRASS

FOR USE IN THIN WALL OR CLOSE TO AN EDGE

ADVANTAGE OF SELF TAPPING THREADED INS... (Read more)

52.

Tsc6 Self-clinching Studs
Model: TSC6 SELF-CLINCHING STUDS
Material：STEEL, STAINLESS STEEL

ADVANTAGES OF CLINCHING PARTS:

‧MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

‧PROVIDE HIGH PUSH... (Read more)

53.

Stainless Steel(Inox)/Stainless(Inox) Steel Blind Rivet
Model: STAINLESS STEEL/STAINLESS STEEL BLIND RIVET
Material：

RIVET: STAINLESS STEEL 302/316 (INOX A2/A4/18-8/18-10)

SHAFT: STAINLESS STEEL 302/316 (INOX A2/A4/18... (Read more)

54.

3/16" Speed Pin Rivets
Model: 3/16" SPEED PIN RIVETS
Material：

BODY: ALUMINUM 2117 /STAINLESS STEEL 302 (INOX A2/18-8) / STEEL

PIN: ALUMINUM 2024 /STAINLESS STEEL 304 (INOX A2/18-8) /STEEL

FINISH... (Read more)

55.

STAMPING PARTS-4
Model: STAMPING PARTS-4
MATERIAL:

STEEL,STAINLESS,BRASS,ALUMINUM

SURFACE FINSIH:

UPON CUSTOMER'S REQUEST

CHARACTERISTICS:

STAMPING PARTS ARE LIGHT, THIN, STRENGTH

... (Read more)

56.

FLAT SEWER ROD
Model: FLAT SEWER ROD
FLAT SEWER RODS ARE USED TO REMOVE SEWER PIPELINE BLOCKAGES BY INSERTING THE ROD INTO THE LINE VIA THE Y-SHAPED ACCESS FITTINGS PERIODICALLY INSTALLE... (Read more)

57.

MALE FEMALE RIVET
Model: MALE FEMALE RIVET
APPLICATION : TABLEWARE

58.

Half-hex W. Small Flange Rivet Nut
Model: HSM, HSI SERIES
SURFACE FINSIH AVAILABLE:

STEEL: CR3 WHITE/YELLOW/BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED

STAINLESS STEEL: CLEAN OR PASSIVATED.

B... (Read more)

59.

Self Tapping Threaded Insert - Manual Installation Tools
1. HOLE SIZE:

RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED O... (Read more)

60.

Tsc7 Self-clinching Standoffs
Model: TSC7 SELF-CLINCHING STANDOFFS
Material：STEEL, STAINLESS STEEL

INSTALLATION

1.PUNCH OR DRILL PROPERLY SIZED HOLE IN SHEET. DO NOT PERFORM ANY SECONDARY OPERATONS SUCH AS DEBU... (Read more)

61.

3/16" TPP Speed Pin Rivets
Model: 3/16" TPP SPEED PIN RIVETS
Material：

BODY: ALUMINUM 2117 /STAINLESS STEEL 302 (INOX A2/18-8) / STEEL

PIN: ALUMINUM 2024 /STAINLESS STEEL 304 (INOX A2/18-8) /STEEL

FINISH... (Read more)

62.

Stretch Folding Blind Rivets
Model: TS SERIES
Material：

ALUMINUM 5052/ MANDREL

ALUMINUM 5056 (ALL MEASUREMENT ARE IN mm)

POSITIVE:

RATTLE FREE FASTENER

CORROSION RESISTANT:

AL... (Read more)

63.

STAMPING PARTS-5
Model: STAMPING PARTS-5
MATERIAL:

STEEL,STAINLESS,BRASS,ALUMINUM

SURFACE FINSIH:

UPON CUSTOMER'S REQUEST

CHARACTERISTICS:

STAMPING PARTS ARE LIGHT, THIN, STRENGTH

... (Read more)

64.

Small Flange Rivet Nut
Model: SAM-C, SAI-C SERIES
SURFACE FINSIH AVAILABLE:

STEEL: CR3 WHITE/YELLOW/BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED

STAINLESS STEEL: CLEAN OR PASSIVATED. ... (Read more)

65.

Tsc8 Self-Clinching Blind Pressed Nuts
Model: TSC8 SELF-CLINCHING BLIND PRESSED NUTS
BLIND PRESSED NUTS ARE DESIGNED TO PROVIDE EXTENDED THREAD LENGTHS IN THIN SHEET METAL. PRESSED NUTS PROVIDE A SEAL AGAINST THE ENTRANCE OF DIRT PART... (Read more)

66.

5/16" Speed Pin Rivets
Model: 5/16" SPEED PIN RIVETS
Material：

BODY: ALUMINUM 2117 /STAINLESS STEEL 302 (INOX A2/18-8) / STEEL

PIN: ALUMINUM 2024 /STAINLESS STEEL 304 (INOX A2/18-8) /STEEL

FINISH... (Read more)

67.

Multi-grip Blind Rivet
Model: TM SERIES
SUITABLE APPLICATION:

‧AUTOMOBILES, MOTORCYCLES, ELECTRICAL APPLIANCES, LIGHTING FIXTURES, ETC.

‧MAKES THE GAP OF JOINING OBJECTS EXPAND FIRST TH... (Read more)

68.

STAMPING PARTS-6
Model: STAMPING PARTS-6
MATERIAL:

STEEL,STAINLESS,BRASS,ALUMINUM

SURFACE FINSIH:

UPON CUSTOMER'S REQUEST

CHARACTERISTICS:

STAMPING PARTS ARE LIGHT, THIN, STRENGTH

... (Read more)

69.

Self Tapping Threaded Inserts - Air Installation Tools

70.

Flat Head (Knurled) Rivet Nut, Closed End
Model: BEM-C, BAI-C SERIES
SURFACE FINSIH AVAILABLE:

STEEL: CR3 WHITE/YELLOW/BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED

STAINLESS STEEL: CLEAN OR PASSIVATED. ... (Read more)

71.

5/32" Speed Pin Rivets
Model: 5/32" SPEED PIN RIVETS
Material：

BODY: ALUMINUM 2117 /STAINLESS STEEL 302 (INOX A2/18-8) / STEEL

PIN: ALUMINUM 2024 /STAINLESS STEEL 304 (INOX A2/18-8) /STEEL

FINISH... (Read more)

72.

Folding Blind Rivet
Model: TF SERIES
Material：

RIVET : ALUMINUM 5052

MANDREL : STEEL / ZINC PLATED

SUITABLE APPLICATION:

‧AUTOMOBILES, MOTORCYCLES, ELECTRICAL APPLIANCES, LIG... (Read more)

73.

STAMPING PARTS-7
Model: STAMPING PARTS-7
MATERIAL:

STEEL,STAINLESS,BRASS,ALUMINUM

SURFACE FINSIH:

UPON CUSTOMER'S REQUEST

CHARACTERISTICS:

STAMPING PARTS ARE LIGHT, THIN, STRENGTH

... (Read more)

74.

Large Flange Splined Rivet Nut
Model: TSBS-C SERIES
SURFACE FINSIH AVAILABLE:

STEEL: CR3 WHITE/YELLOW/BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED

STAINLESS STEEL: CLEAN OR PASSIVATED. ... (Read more)

75.

STAMPING PARTS-8
Model: STAMPING PARTS-8
MATERIAL:

STEEL,STAINLESS,BRASS,ALUMINUM

SURFACE FINSIH:

UPON CUSTOMER'S REQUEST

CHARACTERISTICS:

STAMPING PARTS ARE LIGHT, THIN, STRENGTH

... (Read more)