三协达企业有限公司

Wishbone extraction tool

产品型号:: W-145
原产地:: 台湾

详细规格及用途描述

Material: Cr-Mo Stee l W/Steel tube Black Finish.

Size 1250mmL.

Design the sliding groove for adjust the position to be work easily.

To push down the wishbone and other suspension parts, e.g. during the disassembly of the drive shaft, during replacing the gaiter or exchange of the wheel bearing. After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabilizer tension, in order to pull the joint from the support.

Pretty often here problems arise:
- the joint wedges again in the cone, after it was pressed down onlybriefly with a tire lever.
- the ball joint or gaiter get damaged.
- the mechanic injures himself or damages suspension partswhen the tire lever slips away.

With this lever tool the work can comfortably and surely be accomplished by one person.

Packing: Brown box / 2pcs/12/13/2.5’ .

相关产品

9PCS Injection Nozzle Puller

5PCS 1/2" Dr.tooth socket

3PCS Indexible Pry Bar

6PCS 3/4" Dr.Impact socket 17-19 -E18-E20-E22-E24 110mmL

Ingenious Penumatic Tool To Install Steering /CVJ Boot

12 PCS Universal Terminal Release Tool Set

13pcs Bosch Type Alternator Kit

6PCS 3/8" Dr. Extra Long Glow Plug Socket

6PCS Diesel Injection Oxygen Sensor Socket

Tooth Socket For Truck Injection Nozzle

6PCS 3/8" Dr. Glow Plug Socket

18-piece Alternaator Repair Kits

3-pucec Injector-nozzle Pullers

Petor Engine Twin Cam Locking / Setting Tool and Flywheel Holding Tool Kit

Tension Spanner and Locking-pin Set

Automobile Special Tools Manufacturer

7" CLIC Type Hose Clamp Plier

Hose Clamp Plier

3PCS Impact Socket

27PS Universal Brake Caliper Tool Set

17PCS 3/8" Dr. Brain Plug Key Set

Door Upholstery Remover 10"L

46PCS Radio Removal Tools

公司名称:	三协达企业有限公司
地址:	403 台中市西区华美街32巷5号2楼
电话:	886-4-2372-6027
传真:	886-4-2376-2023
E-Mail:
网址:	www.ssdgroups.com

Wishbone extraction tool

详细规格及用途描述

发送询问函给厂商