Hydraulic Multi-stage Servo Rotary Drill
* Oblique, rotary hydraulic chuck for auto-centering clamping
* Servo-controlled turntable for free index setting
* Hydraulic multi-stage auto-feed...
Bench Tapper with Table Exchanger
Table exchanger enables tapping at one stage and chucking at another to enhance efficiency and operator safety.
Two-in-one Multi-spindle Drill & Tapper
Two units work simultaneously to respectively handle multi-hole drilling and tapping with only one operator.
In-line Drill & Tapper
In-line machines as pneumatic auto-feed drill, servo-feed drill, gear-drive tapper, lead-screw-drive tapper, semi-auto-feed drill, manual-feed drill e...
* Taps sheets with multi-spindle head.
* Gear-drive unit also works with adjustable multi-spindle head (optional) to tap tens of holes simultaneousl...
Vertical Duo-stage Multi-spindle Drill & Tapper
May be designed and made according to workpieces
4-station 6-spindle Valve Processor
* Expands and taps 1/2″~2″ gate valves
* Capacity: 1pc/sub-15sec.
* The most economical dedicated machine for valve processing
4-station 4-spindle Valve Bonnet Processor
* Works on 1/2″, 3/4″ and 1″ valve bonnets; capacity: 1pc/12sec.
* Works with upper and lower spindles; unique, water and filing-resistant design lo...
8-station 9-spindle Valve Processor
Works on 1/2″, 3/4″ and 1″ valves (ball or gate valves); capacity: 1pc/12sec.
6-station 6-spindle Processor
* Works on two-way and three-way valves; capacity: 1pc/sub-12sec.
* Unique two-way tool deployment design enables combination processing of OD and gr...
Inverted-type Deep-hole Drill
Fully-closed hi-pressure internal-cooling processing; one-cycle drilling with 1pc/45sec. capacity; applications: pistons for motorbike brake master.
Horizontal 3-way Multi-spindle Drill
Drills left and right sides of motorbike starters simultaneously from three directions to complete high-precision drilling of some 30 holes on tank fa...
Vertical & Horizontal Multi-directional Drill
* Drills holes along motorbike starter crankcase and on joint faces.
* Dedicated machines for variable production line layout for processing left an...
* Processes universal front fork
* Symmetry tolerance of both spring slots: sub-0.10mm
Vertical 4-station Drilling, Reaming & Chamfering Machine
Handles high-precision drilling and reaming of planetary gears for drive shafts withmulti-spindle head.
High-precision 6-station 4-spindle Rotary Drilling, Boring & Tapping Machine
Taps planetary gears for drive shafts with sub-0.05mm tolerance.
Horizontal 2-station Multi-spindle Drill & Tapper (with sliding table)
Effectively drills and taps (7-M4 thread) automotive control arms with 1pc/sub-25sec.
Vertical & Horizontal 6-station Rotary Processor
* Handles precision, 3-face 2-hole processing of
compressor supports, enhancing output
quality and effectiveness
* Capacity: 1pc/sub-15sec.
Vertical Multi-spindle Drill
* Drills holes on compressor balance-blocks
* Unique chuck design enables simultaneous,
highly-efficient, precision duo-workpiece
Vertical 2-station NC Milling Machine
* Drills holes and mills grooves on upper compressor-cylinder caps
* Dedicated, in-line machines (excluding lathes) for processing upper and lower cy...
Vertical 2-station Multi-spindle Drill
* Drills and face-mills front covers of automotive A/C compressors
* In-line machines for processing front and rear covers also available
Horizontal 2-station Boring & Tapping Machine (with sliding table)
Bores and taps flanged fuel inlets of speed reducers.
Two-station Dual-sided Drilling & Tapping Machine (with sliding table)
* Handles dual-sided drilling and tapping of speed-reducer flanges
* Exclusive design enhances functionality to process flanges of various specs
Vertical 2-spindle Boring Machine
Strong and highly efficient; handles rough and fine boring of center holes of bearing supports