Detail Specifications / Descriptions

1. The static switching modules of the JK3PSZT series are the basic building block for the construction of static capacitor banks for power factor correction purposes. These capacitor banks use thyristors instead of the classic contactors for the connection of each large group of capacitors and they are ideal in installations where the leakage current suffers quick and large fluctuations (load changes in intervals that can range from split seconds to 8 or 10 seconds).

2. The static switching units of the JK3PSZT Series have been designed to connect and disconnect capacitors in milliseconds. They can be used to build capacitors with various steps, or for the individual compensation of a load that must be compensated instantly due to connection / disconnection deficiencies, for example, in welding units, cranes, lifts, etc.

3. Automatic capacitor banks with static system - JK3PSZT Series
The JK3PSZT Series capacitor banks with static system have been designed for Power factor correction purposes in networks with fluctuating loads. The variations in power are relatively fast (in milliseconds) so that the switching operations are carried out by thyristors, which are connected to a voltage control board, so that the connection and disconnection of the capacitor is carried out with a zero voltage difference. Transients are prevented between the connection and disconnection of steps, obtaining the immediate response to the load fluctuations.