cens logo

Overall Output of Taiwan's Manufacturing Sectors Expected to Grow in 2018

Feb 09, 2018 | By CENS

As Taiwan's Industrial Production Index for 2017 just showed the strongest year-on-year (YoY) growth of 2.9 percent ever in history, Ministry of Economic Affairs (MOEA) expects overall output of the island's manufacturing sectors to continue to grow this year.

MOEA's statistics department reported, Industrial Production Index of Taiwan last December reached 113.42, up 1.2 percent from a year ago as the second highest monthly record for the entire year; while production index of the local manufacturing industry also edged up by 0.93 percent YoY to 114.94.

Noteworthily, Industrial Production Index and a production index of the manufacturing industry for the whole year stood at 109.63 and 111.72, respectively, rising 2.9 percent and 3.74 percent YoY, both the sharpest increases in the past three years.

Wang Su-juan, deputy director of the statistics department noted that last December, combined output of machine tools, electronics, semiconductor production equipment, ball screws and linear guide, surged by 7.47 percent YoY mainly on growing demands for intelligent manufacturing equipment.

Fueled by the continued growth momentum, the statistic department pointed out that the manufacturing production index this January is expected to have posted a 5 percent compared to last January.

In the meantime, driven by the broadening application of intelligent manufacturing technologies, market demands for electronic components like IC packaging, printed circuit boards (PCBs), and flash memory products have continuously increased as well. However, as local LED chip and 12-inch wafer manufacturers have tended to churn out higher-end products in exchange for better margins rather than higher output, the YoY growth of overall production volume by the sector for last year was offset to only a 0.9 percent.

Benefiting from the continuously rising of international raw material prices, the local chemical industry and base metal industry enjoyed a 2.16 percent and 2.94 percent, respectively, in output.

On another front, production volume by local auto parts makers decreased by 2.09 percent last year from a year earlier, primarily because local carmakers were forced to cut output in response to the encroachment of imported cars on sales of locally assembled vehicles in the domestic market, as well as adequate inventory levels held by distributors and agents.

As to outlooks in the first quarter of this year, MOEA officials stressed that Taiwan's manufacturing sectors are likely to remain on an uptrend, based on IMF's global economic growth forecast for 2018, which has been adjusted upward to 3.9 percent, a percentage point of 0.2 higher than 3.7 percent for 2018. Another positive factor among others is the recent passage of the so-called Forward-looking Infrastructure Development Program by the Taiwanese government, which is expected to help further sustain local manufacturing sectors this year once put into action.


Industry Reports

Fullamp offers exceptional motorcycle starter motors and magnetic A.C. generators

Oct 01, 2018

CENS.com - Rosa Lo Fullamp International Co., Ltd. has stuck to its four core managing principles – integrity, quality, innovation and sustainability—over the course of 30 years since its foundation. Offering quality products has always one of the firm’s core values and they have continuously achieved that by focusing on starter motors and magnetic A.C. generators for motorcycles in terms of d...

FULLAMP INTERNATIONAL CO., LTD.


Modern Auto Products Corp. leverages optical expertise for quality vehicle mirrors

Oct 01, 2018

Founded in 1985, Modern Auto Products Corp. started off its business through manufacturing mirrors and eventually moved towards developing replaceable rearview mirrors. In recent years, Modern Auto has also chosen to invest and expand its sales for rearview mirrors in the truck industry. With decades of strong, professional expertise in optical coating, Modern Auto’s prowess in developing and ...

MODERN AUTO PRODUCTS CORP.


Taiwan Innotech Expo Presents Creative and Functional Marriage of Technology

Sep 28, 2018

Taipei-2018 Taiwan Innotech Expo (formerly known as Taipei Int’l Invention Show & Technomart/Taipei Inst) kicked off on Sept. 27, showcasing 496 exhibitors throughout the three-day event. Exhibitors have come all around the world to attend the show, including the U.S., Canada, Japan, South Korea, Thailand, the Philippines, Vietnam, Singapore, Malaysia, Indonesia, Australia and New Zealand...



Industry In-Focus

CENS.com shores up biz-matching at Moscow MIMS

Sep 26, 2018

MIMS Automechanika Moscow 2018 kicked off from Aug. 27 to Aug. 30 at ExpoCentre in Moscow, where over 1,200 exhibitors from 40 countries around the world, occupying 40,000 sq meters of showroom space. The show was organized by ITEMF EXPO, founded by ITE, Automechanika Frankfurt and Messe Frankfurt. As the organizing team are well-respected and highly influential in Russia, Eastern Europe and C...


TIER warns of prosperity decline post-boom due to trade war and other factors

Sep 25, 2018

With the trade war between the U.S. and China escalating, Taiwan Institute of Economic Research (TIER) has sounded the alarm as forecasts for both manufacturing and service indexes tumbled. The think tank warned that Taiwan’s business climate will likely see a sudden down drop and urged increased awareness of the potential impact of the trade war would have on Taiwan’s exports. The think tank ...


Foxconn to join forces with GE for cross-country innovation

Sep 10, 2018

In a bid to increase cross-country innovative transformation, Foxconn Technology Group was reportedly on the table for potential partnership with the U.S.’ General Electric Company (GE). Reports indicate that GE was offering a good-willed opportunity that was green-lighted by Foxconn CEO and Chairman Terry Guo. Guo reportedly ordered a delegation of high-ranking managers to visit GE subsidiar...



Supplier News

Fullamp offers exceptional motorcycle starter motors and magnetic A.C. generators

Oct 01, 2018

CENS.com - Rosa Lo Fullamp International Co., Ltd. has stuck to its four core managing principles – integrity, quality, innovation and sustainability—over the course of 30 years since its foundation. Offering quality products has always one of the firm’s core values and they have continuously achieved that by focusing on starter motors and magnetic A.C. generators for motorcycles in terms of d...

FULLAMP INTERNATIONAL CO., LTD.


Modern Auto Products Corp. leverages optical expertise for quality vehicle mirrors

Oct 01, 2018

Founded in 1985, Modern Auto Products Corp. started off its business through manufacturing mirrors and eventually moved towards developing replaceable rearview mirrors. In recent years, Modern Auto has also chosen to invest and expand its sales for rearview mirrors in the truck industry. With decades of strong, professional expertise in optical coating, Modern Auto’s prowess in developing and ...

MODERN AUTO PRODUCTS CORP.


LC Fuel Tank System Enters Classic Car Market

Sep 18, 2018

Frankfurt – Professional fuel tank supplier and manufacturer LC Fuel Tank Manufacture Co. provides fuel tanks, fuel filler pipe, fuel tank strap, float unit, engine system oil pan, and related services. LC Fuel Tank has been awarded by ISO 9001 international certification in North American and Europe. The firm has over 1,500 different products. Product Quality Control Manager Chan Ching-Ying said...

LC FUEL TANK MANUFACTURE CO.



Insiders' Views

Part 1 Megvii Technology Founder Interview: Face++ AI Facial Recognition sets eye on Asia, starting with Taiwan

Sep 07, 2018

Using facial recognition to remove security checks and recognizing criminals sounds like technological applications out of a movie, though much of it is already implemented in everyday life. Having been founded for only seven years, Megvii Technology Limited, or more commonly known for its facial recognition and AI application Face++, owns critical technology by combining both, and now, recently ...

FOXCONN TECHNOLOGY


Megvii Technology Founder Interview Part 2: Face++ AI Facial Recognition sets eye on Asia, starting with Taiwan

Sep 07, 2018

Tang Wenbin, founder and CEO of Megvii Technology, will be visiting Taiwan next week, but accepted an overseas interview with Economic Daily News on Sept. 6. This is the second installment of the interview. Aiming for a complete application; forming a city’s “brain” Q: What are the goals and strategy for the next phase? A: When the company first started off, we had to find a way to impl...

FOXCONN TECHNOLOGY


MPN's Editor-at-large Provides Holistic, In-depth Insights into U.S. Market for Powersports

Industry veteran suggests Taiwanese suppliers establish market presence as priority

May 24, 2018

One of the concurrent events held during the 13th Taiwan International Motorcycle Industry Show (Motorcycle Taiwan 2018), the seminar titled “Turning New U.S. Powersports Business Opportunities” was rounded off with overwhelming acclaim from the audience as a resounding success, mostly thanks to the excellent quality of the lecturers invited, all of whom are seasoned veterans and experts at high ...



Exhibition Highlights

Taiwan Hardware Show 2018-‘Made in Taiwan' Hardware for Global Applications

Sep 28, 2018

Taiwan has long been a great source for the latest high-value hardware products with competitive prices for international buyers. Against the country’s outstanding production and R&D capabilities, prompt delivery and international sales and distribution network, Taiwanese manufacturers are recognised as reliable business partners to global hardware businesses. Matching the quality expectations an...


Taiwan Innotech Expo Presents Creative and Functional Marriage of Technology

Sep 28, 2018

Taipei-2018 Taiwan Innotech Expo (formerly known as Taipei Int’l Invention Show & Technomart/Taipei Inst) kicked off on Sept. 27, showcasing 496 exhibitors throughout the three-day event. Exhibitors have come all around the world to attend the show, including the U.S., Canada, Japan, South Korea, Thailand, the Philippines, Vietnam, Singapore, Malaysia, Indonesia, Australia and New Zealand...


Brilliant Lighting Options in Premier Marketplace

Sep 27, 2018

The Hong Kong Trade Development Council will stage the 3rd Hong Kong International Outdoor & Tech Light Expo from 26 to 29 Oct 2018 at the AsiaWorld-Expo. The Outdoor and Tech Light Expo is expected to host more than 410 specialist exhibitors from around the world, making it a rich source of lighting for commercial and industrial use. Horticultural Lighting Zone Debuts at Outdoor & Tech L...