cens logo

Mini LED on the Rise

May 12, 2020 | By CENS

Currentlt, Mini LED on the RiseCurrentlt, Mini LED on the Rise
Due to the impact of New Coronary Pneumonia, most of the technology industry trends that everyone was optimistic about at the beginning of this year probably showed signs of delay, but this year 's development of Mini LED not only has not been delayed, but the development has become more and more hot, mainly due to Apple 's vigorous introduction of Mini LED in NB and tablet products .

Apple is currently developing six new products using Mini LED screens, namely 12.9-inch iPad Pro, 27-inch iMac Pro, 14.1-inch MacBook Pro, 16-inch MacBook Pro, 10.2-inch iPad and 7.9-inch iPad mini.

We believe that Apple's vigorous introduction of Mini LED is mainly due to the fact that most high-end notebooks currently use OLED panels. Apple has been pinned by Samsung on mobile phone panels, and if it needs to be differentiated from the specifications of high-end pen level boards on the market , The implementation of Mini LED is a good way.

Compared with OLED, Mini LED has a long life, high contrast, wide color gamut, high resolution and does not have the problem of branding like OLED. It can be used with a flexible substrate to achieve a high-curved backlight. Local dimming allows the panel to have a finer HDR partition makes the black and white contrast deeper.

In addition, the Mini LED backlight technology and the traditional LED backlight technology are only inferior to the use of more Mini LED chips and Size, so for Taiwan manufacturers, only need to reinvest some equipment, such as parts transfer, testing equipment, and redesign Just drive the IC and select the substrate.

According to estimates by the research institute, Mini LED will enter a rapid development in 2020, and the penetration rate will reach 5% and 10% in 2020 and 2021 respectively. It is estimated that the output value of Mini LED will reach 686 million US dollars by 2022.

In terms of terminal product applications, from the second half of 2019 to 2020, terminal applications are mainly high-end products, including e-sports NB, e-sports PCs, special-purpose screens, and high-end TVs.

According to our estimates, assuming a global Mini LED penetration rate of 5%, about 14.57 million 2-inch wafers are required, which is about 7.6% of the global supply of 190 million LED wafers in 2019. Considering future TV backlights and mobile phones With the increase in the penetration rate of backlights and automotive display screens, the demand for LED chips is more elastic.

Judging from the nearly ten million pieces of production capacity of the leading crystal power plant in Taiwan, if the penetration rate of Mini LED continues to rise, Mini LED will cause a major change in the profit structure of the Taiwan plant. Investors can pay attention to the beneficiaries of related industries such as Jingdian (2448), Ronda and Huite.

If the development logic of the industry follows the trend of Mini LED after Apple's vigorous promotion, other brands will definitely follow up, and not only limited to NB and tablet, TV, mobile phone, car and other products penetration rate will also have the opportunity Before the technology of Sanan Optoelectronics in China is in place in a short period of time, the Taiwan LED fab and surrounding equipment manufacturers are expected to become industry leaders and become the biggest beneficiaries.


Industry Reports

Samsung's Potential Mini/Micro LED Partnership with Taiwanese Firms</h2>

Samsung's Potential Mini/Micro LED Partnership with Taiwanese Firms

Sep 28, 2020

The world's leading memory chip and smartphone maker Samsung Electronics is looking for potential display technology partnerships in Taiwan, specifically for mini/micro-LED industry applications. Local media Economic Daily News reported Samsung was partaking in a private project with LED driver IC supplier Macroblock Inc., a move signaling the Korean group's further ambition in the mini/micro-...


Strong Global Trade Rebound for Two-Consecutive Months: CPB</h2>

Strong Global Trade Rebound for Two-Consecutive Months: CPB

Sep 28, 2020

Since July, global trade volume continues to rebound, signaling economies' restarting in a bid to make up the worldwide lockdown this spring due to the pandemic. In a report released by the CPB Netherlands Bureau for Economic Policy Analysis, the CPB World Trade Monitor in July grew 4.8% compared to June, the largest increase since the bureau began compiling statistics in 2000. This is slightl...


Digitalization Essential for Business Survival: APEC Finance Ministers</h2>

Digitalization Essential for Business Survival: APEC Finance Ministers

Sep 26, 2020

The COVID-19 pandemic has accelerated the digitalization of membership economies, which has become an essential factor in a company's survival, reported in a unified statement released by finance ministers of representing APEC member countries. Convened under the chairmanship of Malaysian Minister of Finance Tengku Zafrul Tengku Abdul Aziz, APEC finance ministers assembled over a virtual confe...



Industry In-Focus

Latest PCB Industry Report NTI-100 Shows Growing Asian Reach</h2>

Latest PCB Industry Report NTI-100 Shows Growing Asian Reach

Sep 23, 2020

Global PCB NTI-100 2019 Fabricators report from the research agency heavyweight N.T.Information showed companies with over USD$1 billion revenue have increased compared to 2018. The report, annually compiled by Dr. Hayao Nakahar, showed in 2019, 122 fabricators were listed reporting revenue over USD$1 billion, an increase of four companies compared to the 2018 list. The report also found more ...


Surgical Masks: the New Battleground for Textile Industry</h2>

Surgical Masks: the New Battleground for Textile Industry

Sep 22, 2020

With most of society worldwide becoming more and more accustomed to wearing masks in the post-pandemic era, it has become a must-have accessory, attracting domestic textile firms into production. Traditional textile firms, such as Eclat Textile, Makalot, Far Eastern New Century, Everest, Roo Hsing, and QVE, have begun making masks, reports say. The COVID-19 pandemic has led to fewer consumers ...


Minth Group Chairman Jong-Hwa Ching. (UDN File Photo)

Leading Auto Parts Supplier Minth Group Eyes Investing in Taiwan Next Year

Sep 21, 2020

The world's leading auto parts and battery housing maker Minth Group's Chairman Jong-Hwa Ching revealed on Sunday that it would launch M&A investment plans into Taiwan next year, focusing on auto parts, vehicle batteries, and the semiconductor industries. Ching named investing in Taiwan as an advantage highlighted amid the trade tensions between the U.S. and China, and expressed optimism in de...



Supplier News

Sheh Fung owns three factories, one of which located in Mituo District, KaoHsiung primarily focuses on packaging and heading.

Sheh Fung Screws' Profitable Q3 Prompts Goal for NT$2 Billion Sales by Year-End

Sep 24, 2020

■ Huang Chih-ming Located in Kaohsiung, Taiwan, Sheh Fung Screws Co., Ltd focuses on manufacturing three categories of screws: self-drilling screws, painted screws, and wood screws, often found in wood construction, sheet metal roofs, wood footpath, and DIY home decor applications. Currently, the U.S. is the firm's primary market, making up 64% of sales, 7% for Europe, 6% for Asia, and 12% for...

SHEH FUNG SCREWS CO., LTD.


Chipboard Screw, Special Wood Screw, provided by Shuenn Chang Fa

Quality Fastener Maker Shuenn Chang Fa Shows Resilience with Sales Boost

Sep 24, 2020

■ Huang Chih-ming Taiwanese quality fastener manufacturer Shuenn Chang Fa Enterprise Co., Ltd.'s (SCF) presented exceptional ability to adapt to challenging times amid the COVID-19 pandemic. Unlike other firms, SCF leveraged its production strategy with its new plant, and even saw sales performing better than expected. SCF’s newest factory expands the original 10,000-square meters factory g...

SHUENN CHANG FA ENTERPRISE CO., LTD.


Stainless Steel Screws, provides by Ray Fu Enterprise Co., Ltd.

Ray Fu's Reliable Fastener Quality for Clients Bolsters Q4 Sales

Sep 24, 2020

■ Huang Chih-ming Ray Fu Enterprise Co., Ltd. is a Taiwanese professional exporter for various fasteners and steel wires. Along with its parent company Chen Nan Iron Wire, both firms are located in Kaohsiung City of southern Taiwan. Ray Fu manages a wire rod storage, spheroidizing annealing furnace, pickling surface equipment, wiring drawing machinery, and fastener forming machine. While the C...

RAY FU ENTERPRISE CO., LTD.



Insiders' Views

Caption: Pictured from front row, third right, Changhua County Government Economic Affairs Department Director Liu Yu-ping, County Magistrate Wang Huei-mei, Secretary Chen Bo-tsun pose in front of the exhibition booth. (Photo provided by CHCIA)

Changhua County Government Shores up Biz-Matching to Global Buyers

Nov 18, 2019

■Yang Feng-Chun In a bid to assist manufacturers in Changhua County to expand their market reach overseas against severe competition in the globalized market, Changhua County Government has been an active player in pushing for a makeover and innovation of its local small and medium-sized enterprises. This is done in hopes of establishing stronger connection with international markets. An ex...


Paul Master offers high-quality chassis and engines parts for passenger cars, trucks, and industrial trucks. (Photo courtesy of Paul Master)

Paul Master Builds Reputation with Auto Chassis and Engine Parts

Nov 18, 2019

Founded in 1980, Paul Master Auto Parts Co. is headquartered in Taiwan, a professional manufacturer of chassis and engines parts for passenger cars, trucks, and industrial trucks including forklifts. General Manager Terry Liang said the company has its own professional design department, which provides customized products and specifications for global buyers, including automobile steering and...

PAUL MASTER AUTO PARTS CO.


Nan Hoang Traffic Instrument Co., Ltd.</h2><p class='subtitle'>Taiwan First brakes Technology Co., Ltd. </p>

Nan Hoang Traffic Instrument Co., Ltd.

Taiwan First brakes Technology Co., Ltd.

Sep 04, 2019

Nan Hoang Traffic Instrument Co., Ltd is one of the major manufacturers of automobile friction materials in Taiwan and globally. Chairman Austin Cheng has implemented the double-arrow strategy this year - own brand of “YangPo” is adopted to focus on global channels while the “NHC brand focuses on improving market shares in global markets, such as Europe, America, Asia, Australia, and the Middle E...



Exhibition Highlights

Stable Development and Popular Fastener Show in China</h2>

Stable Development and Popular Fastener Show in China

Sep 11, 2020

Driven by market prospects, domestic and international exhibitors actively prepare International Fastener Show China in Shanghai on November 3-5, 2020. Suffering from global epidemic and quarantine nearly half year, exhibitions are hot and popular in mainland China. Thousands of visitors join and visit the exhibitions with inquiries, and are eager to know new technology. Domestic and inter...


2020 Medical Taiwan to Host In-Person and Virtual Events</h2>

2020 Medical Taiwan to Host In-Person and Virtual Events

Sep 10, 2020

2020 Medical Taiwan is slated to kick off on Oct. 15 to Oct 17 at Nangang Exhibition Hall 2. Aside from events at the show, show organizer Taiwan External Trade Development Council (TAITRA) is also hosting the “Medical Taiwan Virtual” online edition at the same time due to travel restrictions impacted by the COVID-19 pandemic. The virtual edition will present 200 exhibitors and over 700 medic...


Automechanika Shanghai 2020 reveals online tools to navigate current trends and post-pandemic opportunities</h2>

Automechanika Shanghai 2020 reveals online tools to navigate current trends and post-pandemic opportunities

Sep 01, 2020

Ms Fiona Chiew, Deputy General Manager, Messe Frankfurt (HK) Ltd, reflected that: “As the industry starts to spring back from the effects of COVID-19, we believe that highly influential platforms like Automechanika Shanghai play a crucial role rejuvenating the market. It is our mission to help players unlock their potential. Therefore, we are continuing to realign our resources by utilising new d...