cens logo

PRODUCT CATEGORIES


Industry Reports

CSC is expected to announce higher nominal steel prices for Q4 relative to Q3. (CSC's plant in Kaohsiung, southern Taiwan shown; photo courtesy of UDN.com)

CSC Likely to Raise Steel Prices for Q4 amid Optimism for Market Recovery

Aug 19, 2015

Amid optimism towards recovery of the global steel market, Taiwan-based China Steel Corp. (CSC), the island’s largest steelmaker by size, is widely expected by market observers to raise its nominal prices of domestically-sold steel for Q4 on August 26, when the firm will announce new prices. The reported expectation for higher steel prices to be charged by CSC in Q4 than in Q3 makes sense, giv...


Taiwan's industrial production continues shrinking YoY in June for the second consecutive month. (photo courtesy of UDN.com)

Taiwan's IPI in June Drops 1.35% YoY to 106.42

Jul 31, 2015

Impacted by steadily shrinking exports and local economy battered by a slowing Chinese economy, recent upheavals in the Chinese stock market, dropping oil and commodity prices, Taiwan’s industrial production index (IPI) continuously dropped by 1.35 percent year-on-year (YoY) to 106.42 in June, albeit having inched up only 0.02 percent over May, according to the latest report issued by the Ministr...


EVA Air finished H1, 2015 with impressive performance mainly on relatively cheap crude oil. (photo courtesy of UDN.com)

EVA Air Spends US$1.58 Bn. on Five New Boeing 777 Freighters

Jul 29, 2015

Apparently shrugging off impact from protracted downtrend in the global air cargo industry, as well as betting on better prospects on the back of lower fuel prices, EVA Airways Corporation (EVA Air), Taiwan’s top-2 airline by size, has just finalized an order for five new Boeing 777F freighters for less than NT$50 billion (US$1.58 billion) as part of its fleet expansion plan that involves NT$65.5...



Industry In-Focus

Taiwan's fastener production volume during 2005-2014

Taiwan's 2014 Fastener Production Again Sets Record High Volume

Production volume in 2014 exceeds new high of 1.812 million tonnes for second straight year

Feb 25, 2015

Compiled by STEVE CHUANG With TV news reports that certain parts of the USA have seen home prices rise sizably since last year, in particular those in San Francisco, and the Greek debt deal tentatively extended, and car sales stateside increase due to falling gas prices, some say the global economic climate looks promising and should drive manufacturing and construction industries worldwide, w...



Supplier News

Shuenn Chang Fa Enterprise Co., Ltd. is a rigorously-managed company with a strong-knitted community among its employees. (photo courtesy of Shuenn Chang Fa Enterprise)

Shuenn Chang Fa Enterprise Co., Ltd. Wood Construction Screws - Complies with ICC or ETA Quality Specification

Dec 04, 2018

Located in Kaohsiung City, Taiwan, Shuenn Chang Fa Enterprise Co., Ltd. (SCF) is a professional fastener manufacturer. SCF mainly produces special high additional value screws and various types of screws for wood construction and automobiles. Apart from having IATF 16949, ISO 14001 and various product CE Certifications, the firm also meets ICC or ETA quality specification for long wood constructi...

SHUENN CHANG FA ENTERPRISE CO., LTD.


Taiwan's Best Customized Fasteners at H.K.C. Rich</h2>

Taiwan's Best Customized Fasteners at H.K.C. Rich

Oct 12, 2018

■ Lo Su-Hua H.K.C. Rich Enterprise Co., Ltd. is a leading trader in high-quality fasteners, having passed ISO. 9001:2015 and ISO. 14001:2015 certifications. With a young and energetic team, H.K.C. Rich is able to provide customers professional and reliable service, ranging from customization of product design to product production. H.K.C Rich is located in Kaohsiung, the world's leading fas...

H. K. C. RICH ENTERPRISE CO., LIMITED


SCF showcased an array of special screws and has successfully attracted many international buyers at the 2018 Taiwan International Fastener Show. (photo courtesy of SCF)

Shuenn Chang Fa Enterprise Co., Ltd. Automotive Fasteners - Complys with IATF16949 Certification Management Specification

Sep 05, 2018

Located in Kaohsiung City, Taiwan, Shuenn Chang Fa Enterprise Co., Ltd. (SCF) is a professional fastener manufacturer. SCF mainly produces special high additional value screws and various types of screws for automobiles. Apart from having ISO 14001 environmental quality certification and various product CE certifications, we have also obtained the latest IATF 16949 certification this year. To ...

SHUENN CHANG FA ENTERPRISE CO., LTD.



Insiders' Views

Kristy Chi, MIRDC's industry analyst.

MIRDC Analyst Shares Views to Dispel Doom of Red Supply Chain on Taiwan's Fastener Industry

Taiwan-to-China fastener exports in Jan.-July 2015 total 11,000 tonnes versus only 3,000 tonnes of imports

Oct 01, 2015

The rise of China’s “red supply chain,” a term coined by market observers for aggressive development of Chinese tech industries backed by the central government to minimize dependence on imports and secure sustained economic growth, is widely regarded a growing threat to Taiwanese manufacturers, especially those from the island’s industries supplying products and services overlapping those from t...


Anchor Chang, new chairman of TIFI as well as owner of Anchor Group and vice chairman of Formosan Association for Promotion of Oral Biotechnology and Medical Devices, talks about Taiwan's fastener industry in an exclusive interview with CENS.

New TIFI Chairman Sheds Light on Development of Taiwan's Fastener Industry

To make TIFS a 3-day event being one of many targets for trade group leader

Feb 25, 2015

Compiled by STEVE CHUANG The Taiwan Industrial Fastener Institute (TIFI), the island’s only trade association composed of fastener manufacturers, is generally regarded as the driver of development of the industry over the past decades, and its newly nominated chairman, Anchor Chang, also the owner of Anchor Fasteners Industrial Co., Ltd. and Alliance Global Technology Co., Ltd., is taking over...


Joe Chen has earned accolades for his contributions to the development of Taiwan's fastener industry over the past six years as chairman of TIFI.

TIFI Chairman Rallies Taiwan's Fastener Industry with an Eye on the World

TIFS set to highlight local strengths at biggest-ever show in April​

Feb 05, 2014

By STEVE CHUANG Joe Chen may be entering his last year as the chairman of Taiwan Industrial Fasteners Institute (TIFI), but the industry captain, also president of fastener supplier Saintec Enterprise Co., Ltd., is still going full-speed to boost Taiwan's competitiveness in the global market. Under his leadership, the third Taiwan International Fastener Show (TIFS) is set to hold its biggest-eve...



Exhibition Highlights

The Fastener Fair Stuttgart 2013 set a record in both visitor and exhibitor numbers. (photo courtesy of Mack Brooks Exhibitions)

Taiwan's Fastener Makers to Show Bigger Presence at Fastener Fair Stuttgart 2015

Over 180 exhibitors from the island to show off technical prowess at the venue

Feb 17, 2015

Compiled by STEVE CHUANG Fastener production is one of Taiwan’s globally competitive traditional industries, with production value exceeding NT$100 billion (around US$3.17 billion) yearly. Mostly clustered in Taiwan’s southern region across Tainan and Kaohsiung, insiders generally boast exceptional quality, high production efficiency and flexibility, achieved mainly through high concentration ...


More than 20,000 visitors and buyers visit TIFS 2014.

CENS at TIFS 2014, the World's No. 3 Fastener Show by Size

Event is Asia's No. 2 and globally No. 3 by booth number

Jan 12, 2015

By STEVE CHUANG In its 40th anniversary this year, China Economic News Service (CENS), founded in 1974 and now a leading Taiwanese export promoter, participated in the opening of the Taiwan International Fastener Show (TIFS) 2014 to witness the island’s only specialized exhibition for the fastener industry and the world’s third-largest, or the largest in Asia, by size. TIFS 2014 celebrated ...


Foreign buyers at CENS booth at TIFS 2014.

CENS at TIFS 2014, the World's No. 3 Fastener Show by Size

May 02, 2014

In its 40th anniversary this year, China Economic News Service (CENS), founded in 1974 and now a leading Taiwanese export promoter, participated in the opening of the Taiwan International Fastener Show (TIFS) 2014 to witness the island’s only specialized exhibition for the fastener industry and the world’s third-largest, or the largest in Asia, by size. TIFS 2014 celebrated its third anniversa...



CENS Global Pass

Stead Fast Industrial Co., Ltd.</h2><p class='subtitle'>Hex head screws, socket cap screws, hex flange screws, rivets, fasteners</p>

Stead Fast Industrial Co., Ltd.

Hex head screws, socket cap screws, hex flange screws, rivets, fasteners

Dec 15, 2014

Stead Fast Industrial Co., Ltd. was founded in 1975 and today is a veteran manufacturer of a variety of standard and special fasteners based in Kaohsiung City, southern Taiwan. The company's constant business mantra is “Quality First, Service First and Competitive Prices.” The key to Stead Fast’s sustainable development over the decades has been its continuous effort to improve technology and up...

STEAD FAST INDUSTRIAL CO., LTD.


Ray Fu Enterprise Co., Ltd.</h2><p class='subtitle'>Wood screw, drywall screw, screws, bolts, nuts, and washers</p>

Ray Fu Enterprise Co., Ltd.

Wood screw, drywall screw, screws, bolts, nuts, and washers

Jul 15, 2014

Founded in 2000, Ray Fu Enterprise Co. is a specialized manufacturer and exporter of fasteners and steel wires. Its steel wire factory in Kaohsiung, southern Taiwan, is quipped with a wire rod warehouse, spheriodizing annealing furnace, pickling surface equipment, wire drawing machines, and screw makers, enabling the firm to carry out quick and stable production for customers in Europe, the U.S.,...

RAY FU ENTERPRISE CO., LTD.


WL HARDWARE ENTERPRISE CO., LTD.</h2><p class='subtitle'>Door Look With Keys, Lock With Keys, Pulley for Window, Auminum Keys, Screw, screws </p>

WL HARDWARE ENTERPRISE CO., LTD.

Door Look With Keys, Lock With Keys, Pulley for Window, Auminum Keys, Screw, screws

May 30, 2014

WL HARDWARE ENTEPRISE CO., LTD was established since 2000, is a professional supplier and exporter, designing and manufacturing a wide range of Fasteners and Architectural Hardware in Taiwan. We are specialized in Fasteners --- Tapping Screw, Self Drilling Screw, Taptite Screw, Wood Screw, Lag Screw, Bolt, Special Bolt, Security Screw, Multi Stage Screw, Nuts, Rivets, Thumb Screws, Clinch...

WL HARDWARE ENTERPRISE CO., LTD.